Consumer Aftermarket
Consumer Aftermarket > Blade Fuses and Accessories

Blade Type Fuses, Circuit Breakers, Holders and Blocks

Blade fuses, circuit breakers, holders and taps for automotive applications.

ATM (Mini) FusesATM Fuses
For late model vehicles, these fuses feature an enclosed element for protection against shock and sparks. Available in 2, 3, 4, 5, 7-1/2, 10, 15, 20, 25 and 30 amp ratings.
Low-Profile ATM FuseLow-Profile ATM Fuses
Popular for late model vehicles, these compact, low-profile ATM fuses save space and feature an enclosed element for protection against shock and sparks. Available in 7-1/2, 10, 15, 20, 25 and 30 amp ratings.
15300 ATM Fuse Panel15300 Series ATM Fuse Panel

The Rear Terminal 20 Position ATM Fuse Panel provides efficient power distribution in a rugged compact package. Available as a 20 position block with or without a shallow or deep cover. Fuses and circuit breakers sold separately.

The 15300 offers a weather tight enclosure (IP66/67) for ATM blade fuses and circuit breakers when cover, cable seals, and cavity plugs are installed.*

*Electrical terminals, cable seals and cavity plugs are either Delphi Packard Metri-Pack® 280 Series terminals (sealed/tangless) or AMP® terminals. They accept #12-22 AWG wire sizes. Delphi Packard 280 Series cavity plugs are installed where wires are not used. Seals and cavity plugs not sold by Cooper Bussmann.

HHL ATM HoldersHHL ATM Holder
Fuse holder with cover, 2-20 amps, #16 leadwire.
  • HHL-B - Body only, no cover
HHM ATM HoldersHHM ATM Holder
Fuse holder with cover, 2-30 amps, #12 leadwire.
  • HHM-B - Body only, no cover
  • HHM-C - Cover only, no body
HHU Waterproof ATM Fuse HolderHHU Waterproof ATM Fuse Holder
Fuse holder with sealed-gasket water-resistant cover with mounting hole. 2-30 amps, #12 leadwire.
CB211 Mini BreakersCB211 Mini Breakers
Type I (auto reset) in 10, 15, 20, 25 and 30 amp ratings. Designed to fit the ATM Mini fuse footprint, these circuit breakers comply with SAE standard J553.
CB212 Mini BreakersCB212 Mini Breakers
Type II (modified reset) in 10, 15, 20, 25 and 30 amp ratings. Designed to fit the ATM Mini fuse footprint, these circuit breakers comply with SAE standard J553.
MMB Mini BreakersMMB Mini Breakers
For replacing GM OEM 15 and 20 amp mini breakers. Designed to fit the ATM Mini fuse footprint, these circuit breakers comply with SAE standard J553.
Mini DevicesMini Devices

Transorb, resistor and diode vehicle-style electrical protection devices easily install in common ATM fuse holders. These circuit protection devices provide voltage and current limiting functionality to vehicle circuitry; and are designed for the on- and off-highway requirements of heavy tucks, RV, construction, agriculture, ATV and material handling equipment.

  • Transorb - Protects against voltage spikes. Clamp rating: 27Vdc. Power rating: 1500W
  • Resistor - Drops circuit voltage. Power rating: 5W. Resistance: 68W.
  • Diode - Prevents reverse current flow. Amp rating: 6A.
BP-ATM-TAP ATM Mini Fuse TapBP-ATM-TAP ATM Fuse Tap
Fits over the leg of an existing ATM blade fuse. Provides a power tap for mobile phone, stereo component, etc. Crimp-on connector easily attaches to power leads.
BP/HHH ATM Mini Fuse TapBP/HHH ATM Fuse Tap
Converts ATC fuse circuit into two fusible circuits. Plugs into fuse block to provide protection for existing circuit and add-on circuit (10 amp maximum).
ATC FusesATC Fuses
Introduced in the late70s, these fuses feature an enclosed element for protection against shock and sparks. Available in 1, 2, 3, 4, 5, 7.5, 10, 15, 20, 25, 30, 35 and 40 amp ratings.
15600 Series Fuse Panel15600 Series ATC Fuse Panel
A single, common power input makes it simple to wire for multiple circuits - each rated to 30 amps, up to 32 volts. Available in 4, 6, 8, 10, 12, 14, 16, 18 and 20 fuse position models with short or long base. Molded of high grade thermoplastic, for superior performance. Quick-connect terminals for easy installation. Recessed fuse contacts provide finger-safe protection. Fuses and circuit breakers sold separately.
HHC ATC HolderHHC ATC Holder
1-20 amps, #16 leadwire.
  • HHD-C - Cover only for HHC
HHD ATC HolderHHD ATC Holder
1-30 amps, #12 leadwire.
  • HHD-C - Cover only for HHD
HHF ATC HolderHHF ATC Holder
3-20 amps with protective cap and #16 leadwire.
HHG ATC HolderHHG ATC Holder
Heavy-duty fuse holders with protective cap, 3-30 amps, #12 leadwire.
HHR ATC HolderHHR ATC Holder
Waterproof fuse holder with locking cap and mounting hole up to 30 amps with 5" 12 gauge leads.
HHS ATC HolderHHS ATC Holder
Self-stripping crimp-type connector holder for up to 30 amps, accepts #12 to #18 leads.
ACB-20 ATC Style BreakerACB-20 ATC Style Breaker
12 Volt, Type I (auto reset) 20 amp breaker designed to fit the ATC fuse footprint, this circuit breaker complies with SAE standard J553.
CB221 ATC Style BreakersCB221 ATC Style Breakers
12 Volt, Type I (auto reset) in 10, 15, 20, 25 and 30 amp ratings. Designed to fit the ATC fuse footprint, these circuit breakers comply with SAE standard J553.
CB222 ATC Style BreakersCB222 ATC Style Breakers
12 Volt, Type II (modified reset) in 10, 15, 20, 25 and 30 amp ratings. Designed to fit the ATC fuse footprint, these circuit breakers comply with
SAE standard J553.
CB223 ATC Style BreakersCB223 ATC Style Breakers
12 Volt, Type III (manual reset) in 10, 15, 20, 25 and 30 amp ratings. Designed to fit the ATC fuse footprint, these circuit breakers comply with
SAE standard J553.
CB227 ATC Style BreakerCB227 ATC Style Breaker

CB227 Type III manual reset ATC footprint low-profile circuit breakers comply with SAE J553 and SAE J1171 for ignition protection. Color coded in amp ratings of 5, 6, 7 ½, 10, 15, 20, 25 and 30A.

CCB-25 ATC Style BreakersCCB-25 ATC Style Breakers
12 Volt, Type I (auto reset) 25 amp breaker. Designed to fit the ATC fuse footprint, this circuit breaker complies with SAE standard J553.
CBB-30 ATC Style BreakersCBB-30 ATC Style Breakers
12 Volt, Type II (modified reset) 30 amp breaker. Designed to fit the ATC fuse footprint, this circuit breaker complies with SAE standard J553.
FCB-20 ATC Style BreakersFCB-20 ATC Style Breakers
12 volt, Type II (modified reset) 20 amp breaker. Designed to fit the ATC fuse footprint, this circuit breaker complies with SAE standard J553.
UCB ATC Style BreakersUCB ATC Style Breakers
A universal Type I available in 6, 8, 10, 15, 20, 25 and 30 amp ratings. Designed to fit the ATC fuse footprint, these circuit breakers comply with SAE standard J553.
BP/ATC-TAP ATC Fuse TapBP/ATC-TAP ATC Fuse Tap
Fits over the leg of an existing ATC blade fuse. Provides a power tap for cellular phone, stereo component, etc. Crimp-on connector easily attaches to power leads.
BP/HHA ATC Fuse TapBP/HHA ATC Fuse Tap
Converts ATC fuse circuit into two fusible circuits. Plugs into fuse block to provide protection for existing circuit and add-on circuit. (10 amp maximum).
MAXI FusesMAXI Fuses
For protecting circuits in the wiring harness, these high amp fuses feature an enclosed element for protection against shock and sparks. Ideal for protecting high amp aftermarket accessories. Available in 20, 25, 30, 35, 40, 50, 60, 70 and 80 amp ratings.
HHX MAXI HoldersHHX MAXI Holder
Fuse holder with cover, 20-60 amps, #6 leadwire.
  • HHX-B - Body only, no cover
  • HHX-C - Cover only, no body
CB1911 MAXI BreakersCB1911 MAXI Breakers
12 Volt, Type I (auto reset) in 10, 15, 20, 25, 30, 40 and 50 amp ratings. Designed to fit the MAXI fuse footprint.
CB1921 MAXI BreakersCB1921 MAXI Breakers
12 Volt, Type II (modified reset) in 10, 15, 20, 25 and 30 amp ratings. Designed to fit the MAXI fuse footprint.